cookie
Registrati o fai il login.

BALER, HORIZONTAL, ...
HORIZONTAL BALER automatic binding machine completely refurbished PLC operated double guillottine for better compacting Dimensions: 2.100 x 3.500 x 9.200 mm. Loading channel size : 1550×1040 mm. Bale size : 800x1100x2300 Pressing chamber 1,4 cubic meter Shot 60 Ton n. 4 vertical bindings main motor 30 Kw installed power 33 kw output 4 to 8 Tons/h 900 lt oil tank PLC for complete managing double V knife for material cutting total weight 14.500 kg. bale outletting chute reel holding units new electrical cabinet Separately available: conveyor belt 12000×1450 mm. 2,2 motor side walls 700 mm.
EXTRUDER SCREW 180mm 40 ...
PELLETIZER SCREW diam.180 mm. 54 L/D for PREALPINA PELLETIZER offered with reconditioning
TECNOVA PELLETIZER 120 ...
TECNOVA RECYCLING EXTRUDER 120 mm screw 33 L/D construction year 1988 forced feeding silo and auger d.c. motor 220 Hp, 306 A electrical cabinet for thermoregulation 10 heating areas 1 degassing system screen changer hydraulic power station die face pelletizer
TECNOVA PELLETIZER 160 ...
TECNOVA PELLETIZING LINE for LLDPE LDPE HDPE PPL PS EPS ABS etc. type 160 mm. made of : Forced feeding unit and scrap silo 160 mm Extruder 37 L/D reconditioned to original conditions and performances N.6 temperature control areas Vacuum 10 hp. pump for degassing D.c. 480 hp drive installed on extruder stand Hydraulic screen changer Screening section mm.300 diameter, Hydraulic power unit Electrical cabinet. Water pelletizer Stainless steel cooling chamber. Blades holding unit controlled by 5,5 Hp. drive with adjustable cutting pressure. Water/granulate conveyor with stainless steel vibro- sifting unit. Stainless steel water collecting tub with 3,0 Hp centrifugal pump. Stainless steel vertical centrifuge with 7,5 Hp drive with inspection doors for cleaning purposes. Steam extracting vent on upper side. Control and heat regulation pulpit. Construction year 2006 Installed power 675 kW/h, average used power about 60% when working. The line is offered completely reconditioned
WATER FILTER FOR ...
AMUT WATER FILTERING SYSTEM loop cycle of cooling water in a pelletizing line, machine offered completely refurbished. Maximum capacity 15 m3/h water (for pelletizer up to 1200 kg./h throughput) n.1 feeding group with pump (1 bar). Turning body in AISI 304 kw 0,75 n.1 TEKNO 10.20 group for non-woven with sensor, made in AISI 304 stainless steel (exept probe and variator). Average filtering 50 my (min 43 max 60 my). Motovariator kw 0,12 Max dimensions : mm.2020x1100x440 height n. 1 000 lt. AISI 304 stainless steel tank for filtered water collection mm.1500x1100x500 N.1 collecting tray for used non-woven tissue, made in AISI 304 stainless steel mm.1100x200x500 n.1 electrical cabinet.
PREALPINA SCREEN CHANGER ...
CDM ENGINEERING SCREEN CHANGER hydraulic piston movement 300 mm diam. screens hydraulic power station complete with vacuum hood series of spare teflon and bushings Construction year 2003 excellent conditions PHOTOS:http://www.germanplast.eu/project/prealpina-screen-changer-ref-pi102/
TECNOVA PELLETIZER 90 mm. ...
TECNOVA PELLETIZER for ORGANIC and HDPE including 400 mm soundproof cased grinder forced feeding unit 90 mm. extruder dry die-face cut vibro classifier discharging cyclone average output : BIO 80 kg/h – LDPE 100 kg/h – HDPE 120 kg/h
TECNOVA PELLETIZER 45 mm. ...
TECNOVA PELLETIZER ES 45 37 L/D construction year 2005 screw diam.45 mm. 22,60 kw drive used to extrude masterbatch strand pelletizer water bath strand drying unit good working conditions average output 110 kg/h photos:http://www.germanplast.eu/project/tecnova-pelletizer-45-mm-ref-et200/
TECNOVA PELLETIZER 105 ...
TECNOVA RECYCLING LINE for PE PS scraps construction year 2015 including CMG GRINDER 600 mm. with extraction vent 10 m3 stainless steel silo loading auger forced feeding hopper extruder with screw diam.105 mm. 36 L/D 110 kw a.c.motor 4 kw.degassing pump electrical cabinet with heat exchanging unit hydraulic screen changer w/screen diam.160 mm. hydraulic power station horizontal die face pelletizer drying centrifuge Average output : 300/350 kg/h
PREALPINA PELLETIZER 160 ...
OMP PREALPINA 160 mm. recycling extruder for PP PS PE ABS PC, etc. storage silo for scraps with extraction auger and agitators forced feeding unit with adjustable speed, extruder with 160 mm. screw , 35 L/D vacuum pump degassing unit, d.c. engine 330 kW, hydraulic screen changer for 300 mm. diam. screens, hydraulic power station die face pelletizer, drying centrifuge. roto-classifier control cabinet construction year 1997 This line is offered with complete reconditioning Sworn appraisal on request
EREMA SYSTEM KAG 800/63
EREMA 63 mm. extrusion line KAG 800/63 was processing only edge trims of LDPE LLDPE PE PP Outpt : up to 230 kg/h depending on material type and feeding rate screw 63 mm diam. L/D 7 pressure sensor Construction year 2001 (some parts replaced in 2016) no degassing unit (for clean, unprinted scraps) voltage : 3×400 V + N + E 51 kw installed power extruder motor 15 kw compactor motor 22 kw complete with conveyor belt FB5000/600 (constructed 08.2016) reel.feeding unit hot granulation die face cutter cutter/compactor/agglomerator cyclone
FRICTION WASHER 3000 kg/h ...
AMUT FRICTION WASHER AMUT FRICTION WASHER, Mod.AUWAS 5000/1300, construction year 2007, this machine has been used for 1 year for tests only. 3phase 90 kw engine. Continuous movement Suitable to remove dirt and glued labels from plastics (PE,PET,PS,etc.) Working time and speed can be adjusted during work. Rotor in 510 D anti-wear steel, Rotor speed 125 tpm., body and paddles in anti-wear metal (creusabro 4008). Heads in Carbon Steel Upper loading lower discharging rock wool insulated walls with stainless steel sheet outer shell water nozzle Average output : 3000 kg/hr depending on material. Can work with cold or hot water (heater not included) Body size : diam.1300 mm. x 5000 mm. length. Total dimensions 7645×1723 mm, 2500 mm height. Complete with electrical cabinet. CE marking, user manuals, drawings available. PHOTOS:http://www.germanplast.eu/project/amut-friction-washer/
CENTRIFUGE
AMUT VERTICAL CENTRIFUGE mm.400 rotor diameter, length mm.1900 mm., 120 mm.long paddles on the whole length, AISI 304 steel basket diam.mm.650, 1975 mm.t​otal height mm.3,0 holes, self-cleaning system through water sprays. Rolling type bearings. 45 kw, 1550 tpm engine. Output 900/1000 kg./hr. Construction year 1998. ​machine reconditioned (photos taken before reconditioning) manuals available PHOTOS:http://www.germanplast.eu/project/amut-vertical-centrifuge/
CENTRIFUGE
AMUT VERTICAL CENTRIFUGE mm.400 rotor diameter, length mm.1900 mm., 120 mm.long paddles on the whole length, AISI 304 steel basket diam.mm.650, 1975 mm.t​otal height mm.3,0 holes, self-cleaning system through water sprays. Rolling type bearings. 45 kw, 1550 tpm engine. Output 900/1000 kg./hr. Construction year 1998. ​machine reconditioned (photos taken before reconditioning) manuals available PHOTOS:http://www.germanplast.eu/project/amut-vertical-centrifuge/
PREALPINA WASHING LINE
PREALPINA COMPLETE GRINDING/WASHING /DRYING PLANT for PE PP scraps from Agricolture and MHW Scraps Average output 500/700 kg/h depending on Scraps Offered with COMPLETE RECONDITIONING Including : – Stainless steel inclined table for easy bale opening – Inclined conveyor belt to wet grinder – CEIA metal detector – MECCANOPLASTICA WET GRINDER Mod.1000 BLC, for scraps pre-washing, with hydraulic grid extraction , 80 Kw.Power. – Draining extraction auger – First PREALPINA 50 Kw shaking centrifuge, – Cyclone to feed silo – 2500 kg. silo with extraction auger, – 6 mt.long float/sink separating and washing tub, complete with dipping and driving paddles, pumps, upper extracting drilled auger and bottom extracting skew chain conveyor and inclined auger for waste material sank on bottom. – Second PREALPINA 50 Kw. drying centrifuge, – PREALPINA Comprex type G400 squeezing- compacting unit, with 400 mm endless screw – second coveyor belt to dry grinder – MECCANOPLASTICA 800 mm. 75 Kw. Grinder for further drying and lumps separation – drying unit with 3 drying silos with double temperature regulation and security thermostate. – electric cabinet for complete management of the line – output material is now ready for extrusion – layout available – dry test possible before loading PHOTOS:http://www.germanplast.eu/project/prealpina-grindingwashingdrying-line-500-kgh/
AGGLOMERATOR
ZERGLOMAT AGGLOMERATOR barrel diameter 800 mm height apporx. 1.000 mm water-spray cooling device pneumatic discharge valve and lid-elevation drive 55 kW control board functionally tested PHOTOS:http://www.germanplast.eu/project/zm-agglomerator-ref-pt100/
PALLMANN PFV200/15
ALLMANN COMPACTING LINE PFV200/15 construction year 2001 including: knife mill plast-agglomerator hot melt granulator cooling air classifying unit die diameter 200 mm. total dimensions 6.000 x 2.300 x 5.100 mm. automatic process – no operator needed quick start a complete system to dry up and increase bulk density of many different plastic materials sound-proof boxed PHOTOS:http://www.germanplast.eu/project/pallmann-pfv-200-ref-iv100/
AGGLOMERATOR CONDOR
FBM CONDOR AGGLOMERATOR barrel diam. 600 mm. appx height 1000 mm. n. 4 adjustable steel knives + n. 2 rotating knives steam extraction vent pneumatic unloading BC 39 22 kw motor to Dimensions: 1500x1400x1350 (H) appx weight 850 kg. This machine is offered with complete reconditioning PHOTOS:http://www.germanplast.eu/project/fbm-agglomerator-600-mm-ref-ld1721/
PREVIERO MU508 M3
PREVIERO MILL MU 508 M3 (MU800) full rotor500x800 mm. n.3 new rotor knives 800 mm. n.2 new stator knives 820 mm. micrometric knives regulation ooled bearings and grinding chamber cooled rotor loading hopper 800×800 mm. side door for quick access to rotor with safety limits 12 mm grid with side extraction Hp130 drive 660/380 V unloading hopper prepared for fan electric cabinet dimensions mm.3200×1620 x 3600 H kg.5.200 construction year 1991 manual available machine with sworn appraisal PHOTOS:http://www.germanplast.eu/project/previero-mu-800-ref-pf111/
GRINDER 650 mm.
GRINDING MILL 650 mm infeed : 800×500 mm side feeding for pipes 300×250 mm. a.c.motor 37 kw semi open rotor 650 mm long n.3 rotor knives + n.2+2 stator knives brand new grid with drilling on request tilting bunker for knives replacement unloading bunker electrical cabinet Machine completely reconditioned with swarn appraisal PHOTOS:http://www.germanplast.eu/project/grinding-mill-800-mm-ref-ge206/
Impianti usati [31]
Macchine di trasformazione, stampi, robot, attrezzature periferiche e automazione di processo.
Materie prime [-34]
Materie plastiche, gomme, materiali di riciclo e scarti da riciclare.
Collaborazioni [-6]
Ricerca e offerta di prestazioni professionali.
Aziende [-6]
Ricerca soci, cessioni di imprese e rami di azienda, partnership per progetti R&D e joint-venture.

Ultimi annunci
  Titolo annuncio ascendentediscendente Inserito il Immagine
Aggiungi ai preferiti BALER, HORIZONTAL, AUTOMATIC 21-06-2017
Nessuna Immagine
Aggiungi ai preferiti EXTRUDER SCREW 180mm 40 L/D PREALPINA 21-06-2017
Nessuna Immagine
Aggiungi ai preferiti TECNOVA PELLETIZER 120 mm. 21-06-2017
Nessuna Immagine
Aggiungi ai preferiti TECNOVA PELLETIZER 160 mm. 21-06-2017
Nessuna Immagine
Aggiungi ai preferiti WATER FILTER FOR PELLETIZER 21-06-2017
Nessuna Immagine
Aggiungi ai preferiti PREALPINA SCREEN CHANGER 21-06-2017
Nessuna Immagine
Aggiungi ai preferiti TECNOVA PELLETIZER 90 mm. 21-06-2017
Nessuna Immagine
Aggiungi ai preferiti TECNOVA PELLETIZER 45 mm. 21-06-2017
Nessuna Immagine
Aggiungi ai preferiti TECNOVA PELLETIZER 105 mm. 21-06-2017
Nessuna Immagine
Aggiungi ai preferiti PREALPINA PELLETIZER 160 mm. 21-06-2017
Nessuna Immagine
Aggiungi ai preferiti EREMA SYSTEM KAG 800/63 21-06-2017
Nessuna Immagine
Aggiungi ai preferiti FRICTION WASHER 3000 kg/h 21-06-2017
Nessuna Immagine
Aggiungi ai preferiti CENTRIFUGE 21-06-2017
Nessuna Immagine
Aggiungi ai preferiti CENTRIFUGE 21-06-2017
Nessuna Immagine
Aggiungi ai preferiti PREALPINA WASHING LINE 21-06-2017
Nessuna Immagine
Aggiungi ai preferiti AGGLOMERATOR 21-06-2017
Nessuna Immagine
Aggiungi ai preferiti PALLMANN PFV200/15 21-06-2017
Nessuna Immagine
Aggiungi ai preferiti AGGLOMERATOR CONDOR 21-06-2017
Nessuna Immagine
Aggiungi ai preferiti PREVIERO MU508 M3 21-06-2017
Nessuna Immagine
Aggiungi ai preferiti GRINDER 650 mm. 21-06-2017
Nessuna Immagine
cookie